Air compressor repair and maintenance is done not only to ensure the health of the air compressor and operation, but also to improve efficiency, to prevent failure of the air compressor is very helpful. Proper maintenance of the air compressor, but can also extend the life of the air compressor service. From the very importance of the company is very much needed, here is everyone to deliver good air compressor maintenance on what to do, how to do it.

6 ways to teach you how to maintain a good air compressor

  1. The sewage storage tank will be discharged periodically, air compressor periodically for sewage. Open the drain valve at the bottom of the gas tank and let the compressor run for a few minutes under 0 2Mpa pressure.
  2. The lubricant must be checked daily, the oily surface should be maintained in a two-red oil mirror or between red circles.
  3. The air filter must be cleaned once a month.
  4. Check the reliability of the Triangle Belt safety valve and tension every month.
  5. Intake fixed exhaust exhaust valve, once a year to remove valve, to remove carbon. Each year to host comprehensive maintenance, check the main moving parts of the alignment gasket, if the wear is too large to be replaced.
  6.  Air compressor requirements in air dry, clean, good ventilation.

We must pay attention to safety as the first element, the air compressor in the repair operation and maintenance of the short press must first release the pressure, after the closing operation, is prohibited by the pressure operation.

As long as you can comply with some of the above operations, it will effectively reduce the chances of failure of the air compressor, improve the operation of the air compressor and extend the life of the air compressor, to create more value for the company.

For more information about Air Compressor Malaysia, please visit https://www.ldckomp.com.my/